Downdraft
Cabinet by INCRA expert Mark Mueller, IN
Easy to
make and extremely effective dust collection system that will be perfect for your
router table. The Downdraft Cabinet uses common hardware store fasteners and hardware
and is made with all wood construction. It's a great beneficial project for your
shop.
INCRA
has teamed up with Woodpeckers, Inc. to introduce a custom version of Woodpecker’s
innovative Precision Router Lift V2 (PRL-V2).
The
concept is like nothing else: To raise or lower the router quickly, the quick
lifting tool disengages the lift’s mechanism and the spring assist allows
the heaviest routers to travel freely with very light effort and no cranking.
The router’s collet can be raised above the table for bit changes in two
seconds!
No
conventional rip fence can match an INCRA
Fence System for efficiency, accuracy, and repeatability. INCRA Systems
position the fence mechanically, so your results won't depend on how much skill
you have, how good your shop's lighting is, or how tired your eyes are. This one-take,
live-on-camera video is one demonstraton broken into three parts, and it demonstrate
how far beyond the limits of conventional rip fences the INCRA Systems can operate.
The
INCRA Jig that started
it all more than twenty years ago has been reissued, and the same qualities that
made it such a knockout then are still relevant in workshops today. By adding
a fence and a couple of simple fixtures (either shop-made or purchased as part
of the INCRA Jig Fence System),
3/8” box joint and 1/2” dovetails can be produced equally spaced or
variably spaced. The 1/2” dovetail template can also be made half-blind,
through, sliding, or cornerpost. For even more variety, the 11 box joint
templates and 29 dovetail templates from the INCRA
Master Reference Guide can be adapted to the Original INCRA Jig to produce
literally billions of joinery variations.
These
universal 5/8” MDF Panels are pre-cut and pre-drilled to instantly accept
INCRA’s Miter Sliders and T-Slot Panel Connectors. Now you can build hundreds
of your own custom jigs and fixtures in minutes with just a screwdriver and your
imagination. The possibilities are endless!
Your
new INCRA Build-It System Starter Kit
provides all of the Build-It System components you’ll need to produce any
of the 5 different beneficial jigs shown here, plus many More!
This
highly versatile collection of Jig and Fixture “building blocks”, along
with the included plans, will change the way you approach these and many other
jig designs, making it possible to produce in minutes what used to take hours
or even days.
Kit includes all of the Build-It System Components
you'll need to produce all of the beneficial jigs shown here and more. Just
connect the parts!
Incra's
new Miter Express offers any miter gauge
owner the safest and most accurate cross-cutting and mitering platform available.
Shown on the left with an optional Incra Miter 1000SE mounted and ready, the Express
features 2 embedded T-Slot channels to secure the included Hold Down Clamp and
Outboard Fence Support.
On the right, the fast "Dock and Lock"
system securely locks your miter gauge in just seconds.It eliminates all side
play with our patented miter channel expansion technology. Even inexpensive miter
gauges will experience a tremendous performance boost when docked on the Miter
Express.
INCRA
Positioner Fence and Jig owners can now make just about any size wooden hinge.
You
now have four different barrel diameters and hinge lengths are limited only to
twice the length of your hinge pin drill bit. The kit includes the HingeCrafter
with drill guide bushings already installed along with instructions, drill bit,
and two six inch brass hinge pins to get you started. You just add the straight
bit and round-over cutters for your choice of barrel diameter.
INCRA
figured out the RIGHT way to put a Lead Screw in a Positioning Machine, and
now we've got the patent - US Patent #5,716,045. You can now buy the next generation
of Incra's legendary accuracy in our new Lead Screw Positioning unit, which sets
an evolutionary NEW STANDARD in incremental precision for the woodworker. See
plenty of photos and learn more about the LS
Positioner, and the LS Super System.
The
NEW Incra Miter V27 combines Incra's famous
accuracy and quality with a no-nonsense design and compact size. The result
is a major price breakthrough that makes the V27 an ideal miter gauge upgrade
for your band saw, router table, sanding station, or table saw. Now you can put
an INCRA Miter Gauge in EVERY miter channel in your shop!
Until
now, if you wanted a telescoping fence on your Incra miter, you had to jump
to the top of the line Miter 5000. Now with
the"Special Edition" Miter 1000SE
and the longer Miter 3000SE, you can have
this terrific feature in two new sizes.
If
you already own a Flip Fence or a Miter 3000
which has the Flip Fence as a standard, you know we would not shut you out
of the new telescoping fence capabilities. We are offering upgrade kits to give
you the same "Special Edition" telescoping fence lengths as found on
the new SE Miter Gauges.
This upgrade is available in two lengths. Miter
Flip Fence owners can add the 18" to 31" telescoping Flip Fence
and Miter 3000 owners can add the 27"
to 49" telescoping Flip Fence for those larger than usual projects.
