|
INCRA
LS Positioner Only
(17" & 25”
shown here)
Part Number: LS17, LS25, LS32
, M-LS17, M-LS25 & M-LS32 |
|
|
 |
Now
available in imperial or metric!
Now available
in both metric and imperial versions,
the LS is the beefiest positioner we've
ever produced, with rock-solid fence
travels of 17",
430mm, 25", 32", or 810mm.
Lifting the red locking lever causes
the patented steel lead screw positioning
system to instantly snap the fence to
the dead center of any multiple of 1/32"
or 1mm with an accuracy of 0.002"
(0.05mm). This allows fence positioning
far beyond what's possible by eyesight
alone, and fence setups are instantly
repeatable. The integrated micro adjust
knob allows moving between whole increments
with 0.001" (0.025mm) resolution
for total control over small fence adjustments.
|
|
|
| The lead screw adds quite
a bit of mass, and because it's used for both
incremental positioning and the micro adjust,
the LS has fewer moving parts than the previous
Ultra positioner. Other improvements include
recessed, "big view" cursor windows,
a large micro adjust knob conveniently located
next to the fence, and all of the functions
are now controlled by a single lever. And,
quite simply, the sleek design is a handsome
addition to any modern shop. |
|
 |
Engraved
Steel Primary Scale
An engraved steel primary
scale, Lexan secondary
scale, and Auto Center Scale (imperial model
only) are included standard. The steel fence
mounting bracket accepts 1/4"-20 fasteners
and is slotted vertically to accommodate several
fence options and positioner installation
heights. The LS17 is directly compatible with
the Pro-II Joinery Fence and the stand-alone
Wonder Fence 37.
|
|
|
The LS17 and LS25 feature a removable, T-slotted
sub base under the tubular base housing. The sub
base allows super-clean mounting directly to the
router table with the fasteners fully concealed.
The LS17 is not recommended for use with the INCRA
TS Table Saw Rail System. |
|
INCRA
LS 17 Positioner Only
The LS17 Fence Positioner is the perfect upgrade
for INCRA Router Systems using the earlier Ultra
Positioners, and it's also the ideal foundation
for any custom system that would benefit from its
1/1000" accuracy and repeatability. In addition
to router table applications, the compact size of
the LS17 makes it also work well for positioning
band saw fences, drill press fences, etc.
INCRA LS 25 Positioner Only
The LS25 Fence Positioner is the perfect upgrade
for INCRA Router Systems using the earlier Ultra
positioners, and it's also the ideal foundation
for any custom system that would benefit from its
1/1000” accuracy and repeatability. The mid-sized
LS25 allows extra routing capacity on a large router
table, and when fitted with the proper sub base,
it offers enough fence travel to be used with the
INCRA TS Table Saw Rail systems in place of the
larger LS32 or Ultra 32 positioners.
INCRA LS 32 Positioner Only
As the largest fence positioner of the LS family,
the LS32 was designed specifically for table saw
use in conjunction with an INCRA TS Rail System.
It's a direct replacement for the Ultra positioners
used with the INCRA TS-II and TS-3A Fence Systems,
and when equipped with the appropriate sub base,
the LS32 can also serve as the foundation of a super-sized,
custom router fence system.
|
