|
|
 |
|
|
INCRA
24" x 32" Center Mount Router Table Top
Part Number: RT2432CM |
|
Available
in 3 sizes for a free standing application.
The 24" x 32" center mount
table is a good choice if you are interested in
using the Wonderfence37 fence without a positioner.
All of our offset style tables are factory pre-drilled
for mounting the LS Positioner direct.
All of INCRA's new lineup of heavy duty router table
tops feature a 1-1/4" MDF substrate with a
high pressure horizontal grade phenolic laminate
top and bottom. With a total thickness of 1-3/8",
these tops are designed to support even the heaviest
of production routers and lifts, and will work with
any standard 9-1/4" x 11-3/4" mounting
plate.
Rather than the typical router plate leveling set
screws that dig into the table's recess requiring
constant re-adjustment, Incra's plate leveling system
puts flat head levelers in the table, not in the
router mounting plate. Access to these levelers
is through the 10 access holes located around the
perimeter of the mounting plate. Just insert the
hex key in the access holes and turn to adjust.
After leveling, a simple quarter turn of the corner
mounted Cam-Lock securely holds the plate in the
router table's recess.
All INCRA Router Tables are shipped with a 3/8"
solid aluminum router mounting plate, pre-drilled
for your router, featuring the exclusive Magna-Lock
magnetic throat plate system. Changing any of the
included throat plates is a snap with the Magna
Lock System.
Just drop in the selected plate. The high energy,
rare-earth magnets hold the plate secure and perfectly
flush every time. All of our mounting plates include
3 laser cut throat plates with a 1", 2-1/8"
and 3-5/8" opening. |
 |
|
|
INCRA
24" x 36" Offset Router Table Top
Part Number: RT2436OS |
|
|
|
Available
in 3 sizes for a free standing application. The
24" x 36" Offset Router
Table Top is our most compact offset router table
designed for INCRA Positioning Systems.
With the INCRA LS17 Systems, this table allows 11"
capacity between the router centerline and the fence
with the positioner's base mounted inside the table's
edge, and allows 16" capacity with the base
overhanging the right-hand edge. This table is not
recommended for the INCRA LS25 Systems. Pre-drilled
for the LS positioners; includes an aluminum MagnaLOCK
Router Mounting Plate and a preinstalled aluminum
miter channel. Use our Router Table Stands to get
a head start building a cabinet. |
|
|
|
INCRA
27” x 43" Offset Router Table Top
Part Number: RT2743OS |
|
|
|
Available
in 3 sizes for a free standing application. This
27" x 43" Offset Router
Table is our widest top and is similar in depth
to most front-to-rear. This table allows full capacity
on the LS 17 Systems. With the LS25 Systems, this
table allows 19" capacity between the router
centerline and the fence with the
positioner's base mounted inside the table's edge,
and allows full capacity with the base overhanging
the right-hand edge. Pre-drilled for the LS positioners. |
|
Note: Specify
your router preference when placing an order with
your INCRA
dealer. (See PDF for compatibility chart)
 |
